DWG FastView drafiting commands: revcloud, sketch, smart pen, text & multileader

Revcloud

1. click the “Draw” button and select the “Revcloud” command;
2. specify the start point of Revcloud by touching on the drawing area, move the finger that touching on drawing area to specify other vertexes of Revcloud, as the finger moving, it will create all other vertexes automatically. All vertexes are connected by arcs forming a Revcloud shape.
3. end this command by lifting the finger.

Sketch

1. click the “Draw” button and select the “Sketch” command
2. create sketches by dragging.
3. confirm it by tapping “✓” keywords behind command prompts.

Smart Pen

1. click the “Draw” button and select the “Smart Pen” command. It is default to draw in Continuous mode. As the finger moving on the screen, the program automatically recognizes the finger trace and generates standard graphics, such as lines, polylines, circles, arcs, and so on. Object snap does not work in Continuous mode. It displays “Single” and “✓”keywords behind command prompts.
2. click “Single” button to create a single object by Smart Pen command. As the finger moving on the screen, the program automatically recognizes the finger trace and generates a single object, such as a line, a polyline, a circle, an arc, and so on. Object snap works in Single mode. It displays “Continuous” and “✓” keywords after command prompts.
3. confirm it by tapping “✓” keywords behind command prompts.

Text

1. click the “Draw” button and select the “Text” command.
2. Specify a point to determine the text position by clicking or dragging in drawing area.
3. you could enter Mtext and return it in popping box.
4. tap “✓” to confirm it.

Multileader

1. click the “Draw” button and select the “Multileader” command.
2. specify the start point of leader by clicking or dragging in drawing area;
3. adjust the start point or specify the end point of leader;
4. input the content in the popping box and tap “✓” to confirm it.